Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Monte carlo spice model

Status
Not open for further replies.
K

ku637

Advanced Member level 4
Full Member level 1
Joined
Apr 6, 2011
Messages
116
Helped
2
Reputation
4
Reaction score
3
Trophy points
1,298
Activity points
2,551
Monte Carlo Simulation LTspice model doubt

Hi,
Im new to MC
i want to do a Monte carlo simulation to identify the effects of component tolerances on my power converter specifications.
The power converter chip is from TI it has got PSpice Average Model and PSpice Transient Model both supplied by TI.

I want to use LTspice for doing this simulation to understand the effects on output voltage,load current,output ripple,power,gain margin phase margin etc..

So which model should i import to LTspice... steady state or transient?

Any suggestions or directions will be greatly helpful.. or if im wrong somewhere please feel free to correct me also..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top