sharkies
Member level 5
- Joined
- Jul 12, 2008
- Messages
- 81
- Helped
- 1
- Reputation
- 2
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 2,009
Hi, I'm using an momcap from the PDK
It has a poly layer throughout the bottom(below M1 layer of course), which I connect to ground.
This is equivalent to the third terminal in the schematic 'symbol' view.
Howver, I'm not sure what to do with the bottom nwell.
It is floating and when I do LVS it gives an error on floating.nxwell_float in the ERC result.
Do people usually tie this a VDD?
Or do people just keep'em floating?
Thanks
It has a poly layer throughout the bottom(below M1 layer of course), which I connect to ground.
This is equivalent to the third terminal in the schematic 'symbol' view.
Howver, I'm not sure what to do with the bottom nwell.
It is floating and when I do LVS it gives an error on floating.nxwell_float in the ERC result.
Do people usually tie this a VDD?
Or do people just keep'em floating?
Thanks