SandCoffin
Newbie level 1
- Joined
- Nov 6, 2011
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,288
2 types of coin : A is 5 and B is 10 cents, only one coin can be accepted at a time
15 cents ~> gate open
>15cents ~> change is also returned
That is the abbreviation of the problem and I got the schematic circuit here using DFF.
I used quartus II to design, and use modelsim to simulate, all compilations work successfully but modelsim does not generate any wave signal
I think problem is related to the DFF, I try by adding more input to PRN and CLRN port of DFF but still does not have any wave signal.
Could anyone give me some advice? I am just a beginner
Appreciate any help
15 cents ~> gate open
>15cents ~> change is also returned
That is the abbreviation of the problem and I got the schematic circuit here using DFF.
I used quartus II to design, and use modelsim to simulate, all compilations work successfully but modelsim does not generate any wave signal
I think problem is related to the DFF, I try by adding more input to PRN and CLRN port of DFF but still does not have any wave signal.
Could anyone give me some advice? I am just a beginner
Appreciate any help