Vermes
Advanced Member level 4
Tesla transformer was built on inverter ZVS Flayback Driver. It is powered by 12V to prevent the capacitor from being damaged.
PARAMETERS
Main:
- Power: about 144W (Rectifier power 25V, current: 6A)
- Voltage: 35000V
- Intensity: 0,0058A
- Type of winding: saucer
- Thickness of wire: 2mm
- Initial winding diameter: 19cm
- Final winding diameter: 40cm
- Resonant scroll: 5-6
- Diameter: 5cm
- Height: 38cm
- Winding wire thickness (without enamel): 0,20mm
- Number of turns: about 1700
- Outside diameter: 20cm
- Diameter of the tube used: 6cm
- Capacity: about 13pF (farads pico)
- Aluminum foil width: 20cm
- Aluminum foil length: 20cm
- Dielectric (polyethylene) width: 25cm
- Dielectric (polyethylene) length: 25cm
- A single dielectric foil thickness: 0,1mm
- Number of layers of polyethylene film of the dielectric: 15
- Number of layers of aluminum foil: 20 (which gives 10 capacitors connected in parallel)
- The dielectric constant of polyethylene foil: 2,4
- * Cuvette, to which capacitor was inserted, was flooded with 8 liters of vegetable oil
Max voltage: about 35000V
Photos:
Link to original thread (useful attachment) – [Mini] Transformator Tesli