Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Miller effect on BIP, what is it?

Status
Not open for further replies.

dengreyes

Newbie level 6
Newbie level 6
Joined
Jun 26, 2004
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
106
What is the so called miller effect of the collector base capacitance of bipolar transistor. would
some body explain how the common-emitter common base connection cancels the miller effect, please explain in an easily understood manner.
 

Miller effect: if a capacitor (C) is placed between input and output of an inverting amlifier,the equivalent input capacitance becomes (1+gain)*C
When the transistor is in common emmiter mode,the base-collector capacitance is this miller capacitor.Since the gain is high,the input capacitance is high,too.It equals Cb-e+ (1+gain)*Cc-b
When the common base mode is used,the base-collector capacitor does not affect the input since it is grounded at the base end.The input capacitanse is equal to Cbe.(Well,in practise there is a small parasitic capacitance between collector and emmiter)
Common collector circuit has the collector end grounded (Vcc is ground for AC) , so the input capacitance equals the base-collector capacitance provided the load has no capacitance of its own.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top