MIG welder 3-phase 200A

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


This device is a homemade 200A 3-phase MIG welder.
  1. the 3-phase transformer self wounded
  2. bridge rectifier halt-steered
  3. thyristor driver (by Patryk 84)
  4. impedance coil on core 20cm2
  5. feeder (on the photo)
The first tests were made on a 0,8 wire – the max result was 140A, which was caused by low speed of the wire (6m/minute). After changing the wire into 1,2mm, the maximum current reached 180-190A. The tension regulation is from 0 to 35V DC.
The CO2 bottle with the reducer and the euro socket is new, but the aluminum housing was really cheap.



More pictures:



Link to original thread - Migomat 3-fazowy 200A – własnoręcznie wykonany
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…