microwave filter simulation error ?

Status
Not open for further replies.
W

whmm

Newbie level 6
Joined
Jun 20, 2013
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
73
Hi ,

I have designed low pass microwave filter with cut off frequency of 3.2 GHZ , I have problem with the result from simulation(S21) .

please can anyone help me ?

View attachment project7.zip
 

Make air cavity x-y dimensions same as substrate.
Increase port z dimension 2 to 3 mm more. better make circuit symmetry though it is not problem.

Hope this works. share more pictures if it could not sove the problem. I guess air bottom is not defined as conductor. or better keep a gnd shape beneath substrate.

Regards.
 

sorry , Should bottom of vacuum box be conductor ?
 

if you define Air as radiation boundary then its good having vacuum box as conductor, or at least bottom of substrate.
Remember for microstrip we need bottom ground
 

ah , yes, I have ground substrate in the design

- - - Updated - - -

I perform the simulation now , but I do not know , what is the reason for resulting this curve ?
 

can u share screenshot of expanded/exploded content on project7 that indicarte ports, results etc.
try increased port size on y direction also.
Also share expanded screen shot on materials sheets etc.

Regards.
 

how can I increase lumped port in y-direction , it is sheet in x-z axis ?

- - - Updated - - -

substrate material-->FR_4
ground material--> copper
microstrip and stubs --->copper
radiation box --> vacuum
lumped port-->sheet
 

I can not understand without pictures.
can u click on all + symbols and make visible of all properties in HFSS window?
if I obseve on the left side of the picture i see only project7 and every thing is hidden.
Make me to understand.
can u use wave guide port? If you learn this i guess you solved it.
 

, the same curve of s21 is obtained after modification ?
 

when I made it at 0,0,0 , HFSS error : objects intersect

- - - Updated - - -

...............
 

got it
make changes in z co-ordinates to -0.005 from existing -3. you should not get error this time


can u share me zoomed version of project properties?
it contains ports, fileds, results, boundaries etc.

- - - Updated - - -

if i am correct you imported the structure form other designs like ADS.
make co ordinate entries same as original design for vacuum i.e. 12.94148 etc shown in the pictures.
repeat the exercise for all data entries like 42.9067246

There is discontinuity in the ports. better practice is chop the design and continue with coarse grid than fine grid.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…