Micrometals PFC torroid inductor calculation

Status
Not open for further replies.
C

cupoftea

Advanced Member level 6
Joined
Jun 13, 2021
Messages
3,059
Helped
62
Reputation
124
Reaction score
139
Trophy points
63
Activity points
15,963
Hi,
Just done Torroid (SH134060-2) with 34 turns which gives L0 = 51uH
And At 5.6Amps L = 43uH
However, their inductor calculator says 34 turns gives L0 = 117uH and L = 100uH at 5.6 Amps.

I used the permeability coefficient given on page 32 of their application guide.

Can you confirm? I hope their coefficiencts arent wrong elsewhere too?

SH134060-2

Micrometals application guide
 

Sort by date Sort by votes
Al value according to catalog is 102 nH, thus 118 uH nominal inductance for 34 turns. If you measure different value, it's probably other core.
 
Upvote 0 Downvote
Thanks, yes i forgot to update the permeability value in the template i'd made out
 

Attachments

  • Mag inc coeffs frm.zip
    159.1 KB · Views: 126

Upvote 0 Downvote
With the AL value, the inductance is very quickly and accurately calculated as FvM as already stated above in post #2.
 
Upvote 0 Downvote
cupoftea said:
Thanks yes, thats only the AL value at zero current.
Click to expand...
Yes, definitely. A plot is provided in the datasheet for AL value Vs Ampere-turns. You could read the AL value for your Ampere-turns from there. The method of calculating inductance from the AL value is the same.
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…