Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Memory requirements for a processor board

Status
Not open for further replies.
E

embeddedlover

Full Member level 5
Full Member level 5
Joined
Aug 10, 2007
Messages
277
Helped
46
Reputation
92
Reaction score
38
Trophy points
1,308
Activity points
3,155
I have a brought up board using one of major processors in market...

There are various types of memories mounted....

1. SD card
2. NAND Flash
3. NOR Flash
4. DDR
5. EEPROM

I want pointers regarding,

1. If i want to load Linux kernel or in case RTOS to which memory should i use?
2. In which memory can i save my application?
3. Where will be my U-boot?
4. For suppose if i want to save some image bit map data, so that i can send it to LCD whenever i want, which memory do i need to use?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top