Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Meissner effect video on metacafe

Status
Not open for further replies.
Who can explain this?

If you read the comments on the video, somebody said:
This is an excellent demo of super conductivity. The liquid is liquid nitrogen. The disk is a magnet. The black block is the super conducting (SC) material (but becomes SC only below its critical temperature, somewhat higher than liquid nitrogen).

When warm, the block has no particular magnetic / electric properties. When cooled, it becomes a SC. One of the properties of a SC is that magnetic fields can be pinned in place in the SC.

A moving magnetic field generates eddie currents within conductors, and can be felt as a resistance to relative motion. In most materials, this current quickly decays due to electrical resistance. In SC, eddie currents do not decay, but instead will tend to hold the magnetic field in place.



It seems real to me.
 

Who can explain this?

HI
If the liquid is liquid nitrogen,why the people's hand in the video can bear so low temperature?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top