Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

MCU with USB host/peripheral selection help.

Status
Not open for further replies.
verilog_coder

verilog_coder

Member level 3
Member level 3
Joined
Jan 4, 2006
Messages
54
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Location
Pakistan
Activity points
1,725
HI everyone,
I need to choose some lost cost, low pin count, ARM based MCU that has both usb host port, and usb device port. I have found few mcu's tht has usb host and device functionality but only one of these functionalities can be used at one time. I need some mcu in which both usb host and usb device ports can be used independant of each other. Thanks in advance.
 

check Atmel and NXP(Philips)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top