Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Mathematic models of scanningsystems (galavometer and amp.)

Status
Not open for further replies.

cube007

Full Member level 6
Full Member level 6
Joined
Mar 12, 2002
Messages
385
Helped
16
Reputation
32
Reaction score
5
Trophy points
1,298
Location
Australia
Activity points
3,477
Hello,

I would like to develop an algorithm for a realtime calculation of vector graphics into single points for showlasersystems. To do this it would be a good idea to simulate the algorithm with a complete scanningsystems (galvanometer and amplifier) for example with Matlab. For this I need mathematic models of these scanningsystems. Do you have such models and could you provide me these?

By,
cube007
 

Re: Mathematic models of scanningsystems (galavometer and am

BOY.! OH BOY we are in the same wavelength .I'm looking for the same .
but for a different application ... !

Did you find any INFO ?? COULD you share it ?

Thanks
 

Hello eltonjohn,

I'm sorry until now I didn't find anything about it. I send emails to "GSI Lumonics", "Camebridge Technology", "Laserworks" and "Scanlab" for one week without any result.

By,
cube007

PS: Which is your application?
 

Re: Mathematic models of scanningsystems (galavometer and am

Hi Cube007

Well i'd like to disclose my project ...But then i will have to kill you!
On more serous note .. What i'm triying to do is to desing a very,very
very cheap galvanometer , For that i need to model the entire mechanisme & system ... I searched long time the net and i didn't find any models . So now i'm trying to find some SPICE or vhdl AMS models

Iwill try to modified them ... But is going to be hard .Because galavnometers have a return mechanism (spring) and all that has to be simulated ..

I even searched the US patents .but nothing .. I wonder if those galvanometers are copyright protected ...
Anyways it will take some time .. !
 

Re: Mathematic models of scanningsystems (galavometer and am

I forgot to say ..

It looks like probably the best way to do this is with a tool called SIMPLORER .. I started learning the student version . Now i'm looking for the full BLOWN .. so if you know .let me know.
 

Re: Mathematic models of scanningsystems (galavometer and am

Hi there,

What im trying to do is a cheap laser scanner with a x,y galvo-scanner. The scanner you can buy are very expensive, so im very interessed in your project. I'm also thinking about build my own galvanomter, but i've no information and idea yet. I acctually wanted to buy a galvanometer and build the driver, but if they are that expensive... I'll let you know when I've some news.

Greets!
 

Re: Mathematic models of scanningsystems (galavometer and am

foifsensej said:
Hi there,

What im trying to do is a cheap laser scanner with a x,y galvo-scanner. The scanner you can buy are very expensive, so im very interessed in your project. I'm also thinking about build my own galvanomter, but i've no information and idea yet. I acctually wanted to buy a galvanometer and build the driver, but if they are that expensive... I'll let you know when I've some news.

Greets!

Hello foifsensej,

at the moment my project is sleeping. What I wanted to do is do build a self made driver. For a galvanometer you would need a very expensive equipment to build a device with a very good accuracy! The accuracy and the speed are the main reasons for the high price.

Perhaps I will restart the project later (some months, some years …).

Bye,
cube007
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top