Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

I realize that just by changing the LC network from figure 1 to figure 2, the DC biasing at the input change from 100 mV to 350 mV.... but I do not understand this. The L and C components I use are ideal components from analoglib. I choose the resistance of the L component to be 1 Ohm for estimation.

[QUOTE="Minh_Hoang_Le, post: 1790537, member: 690714"] I realize that just by changing the LC network from figure 1 to figure 2, the DC biasing at the input change from 100 mV to 350 mV.... but I do not understand this. The L and C components I use are ideal components from analoglib. I choose the resistance of the L component to be 1 Ohm for estimation. [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics