Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Making clock with JK Flip Flop

Status
Not open for further replies.

neilpatel

Newbie level 4
Newbie level 4
Joined
Aug 22, 2017
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
33
Is it possible make clock of 24 hours using JK Flip Flop. I was wondering threads and found this old thread, but they never had discussed further.

I'll surely give it a try if it's possible.
 

It is feasible to turn a flip flop into an oscillator whose period is 24 hours. You'd use an RC timing network with a capacitor whose value approaches 1 Farad or higher. It will be time-consuming for you to adjust it so it yields 24 hours. It is more practical to make an oscillator with a short period, which you divide many times to achieve 24 hpurs.
 
Thanks, That would be way more simple and convinient
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top