shparekh
Newbie
- Joined
- Mar 5, 2013
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,303
Hi,
I am designing an accelerator card that receives data over the 10G Ethernet and writes to a SATA drive. The card needs to sit in a windows PC PCIe slot. As such the data that is written to the SATA drive needs to be seen by the Windows.
I can see how I can put 10G MAC, PCIe and SATA interfaces in an FPGA. What I do not know is how I can setup the drive so that it will be accessible by both the Windows and the ENET offload engine.
I appreciate any help.
Thank you.
Best regards,
SP
I am designing an accelerator card that receives data over the 10G Ethernet and writes to a SATA drive. The card needs to sit in a windows PC PCIe slot. As such the data that is written to the SATA drive needs to be seen by the Windows.
I can see how I can put 10G MAC, PCIe and SATA interfaces in an FPGA. What I do not know is how I can setup the drive so that it will be accessible by both the Windows and the ENET offload engine.
I appreciate any help.
Thank you.
Best regards,
SP