madhavan r
Newbie level 1
- Joined
- Jun 22, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 7
i ran lvs after placement... it showed open circuit error for output port ... those outputs which were instantiated in particular submodule... i had 1000 bit counter.. of 1000 bit nearly 40 bit were used to instantiate in particular submodule...y nly those output ports show open circuit error...netlist had no problems...but when i ran routing it was gone.... hw ... y virtual router cannot route...