Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

LPC111x test board + USB (UART) programmer – the minimum set to the ARM

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Visit site
Activity points
22,318


It is a minimum set for tests during learning how to program e.g. microcontrollers LPC1111/2/3/4.

Board
The board with LPC1114 microprocessor, quartz plus capacitors for the quartz and power supply.
2 rows of headers for easy plugging in the pin into the board.

Programmer
USB-UART adapter (on FT232RL system), automatic reset and entering in bootloader mode, the programming voltage selection made with a jumper:
  • 3.3V
  • 5V
  • external voltage
The systems are easy to make at home. Main costs are LPC and FT232RL.



Link to original thread (useful attachments) – LPC111x test board + programator USB(UART)- Zestaw minimum do ARM
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top