Low range wireless dynamic mic TX

[fjpompeo]

Need a crystal controlled 6V or 9V powered FM transmitter(no SMD). This will be used to transmist a dynamic mic or guitar signal to a power amplifier. Range within 100m is OK. Preferably frequency within FM commercial band(87,5MHz-108MHz) but can be outside (up is better).
It can use discrete components PLL (4059, 4060, 4013, 4046, etc). No ASIC PLLs like SAA1057, MC145152, etc..


Thanks,

Fernando

 

[bobcat1]

Hi

Search for MC145170 PLL ic and you will find many schematic and kit for Fm Transmitters

Best



Bobi

 

[fjpompeo]

Bob,

Thank you for your reply but no ASIC plls like MC145170 just CMOS plls like 4046OK.

Regards,

Fernando.