low power transformer for high current output

Status
Not open for further replies.

electrophile

Member level 2
Joined
Aug 30, 2013
Messages
48
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,677
Hi, i'm designing a dual output power supply with each capable of 2A. For such a scenario the input needed is 24V and with dual 2A output my transformer will need to be in the 125VA to 150VA range which are really expensive. Is there a way i can use a low current transformer add a bridge rectifier and multiply the current this bridge outputs?
 

(Volts *Amps)/ Efficiency * 2 = Total watts
Assuming an efficiency between 0.8 and 0.9, you require between 107 and 120 watts. This is assuming a relatively simple switchmode regulator, if you use a linear regulator the efficiency could drop below 0.5

Since a rectified sinewave lowers the power factor, a bare minimum 150VA transformer is required.
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…