Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Low-noise down-converter - help needed

Status
Not open for further replies.
R

raed_microwave

Advanced Member level 4
Full Member level 1
Joined
Jul 26, 2008
Messages
107
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
Kassel, Germany, Germany
Activity points
2,066
Low-noise down-converter

Hi dears...
I'd like to design Low-noise down-converter and I know to design each stage like (LNA, Mixer or oscillator) but I don't know to start designing it. So I need your help to know in general the first steps of design and the simulation Low-noise down-converter. I think, its better to provide me some of examples of design.

Thanks in Advance
 

Re: Low-noise down-converter

raed_microwave said:
... provide me some of examples of design.
Click to expand...
May be this tutorial can help you.
 

Re: Low-noise down-converter

erikl said:
raed_microwave said:
... provide me some of examples of design.
Click to expand...
May be this tutorial can help you.
Click to expand...

Thanks for your example, but unfortunately I don't have this software.....I'm using Genesys from Agilent. Just I need how can I start i.e. the first steps of planning to design a Low-noise downconverter.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top