Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking to build a 470 to 700 MHz discone...

Status
Not open for further replies.

Externet

Advanced Member level 2
Advanced Member level 2
Joined
Jan 29, 2004
Messages
603
Helped
28
Reputation
58
Reaction score
30
Trophy points
1,308
Location
Mideast US
Activity points
6,026
Hi.
Hope the instructions, calculations and guidance found on the web work; am building one for the new U.S. television spectrum.
How is the gain increased for a discone ?
 

The gain of a discone antenna for entire operating frequencies is around 0dBd (faithfully).
There are many things that can affect the gain flatness vs frequency, especially the design of the feed point of the antenna, including the isolator between the disk and the cone.
 

You will find many old TV antenna designs for that UHF TV band. Most are directional, and that is where the gain comes from.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top