Looking for tutorials on T6963 GLCD controller

Status
Not open for further replies.

Tajinder Singh

Junior Member level 1
Joined
Jun 12, 2009
Messages
18
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,283
Activity points
1,395
hello,
anybody have basic tutorial on t6963 glcd controller
i have read the datasheet but still not able to make a picture in mind how to start programming, what would be the seq of its initialization, and how any graphic or text can be displayed on it.
 

t6963c tutorial

it sounds rough but after you have read the datasheet thoroughly for more than 50x, you can start programming it.

that's just my experience but it has served me well so far.
 
glcd tutorial

see, i have done status checking and interfacing
but how to initialize addresses for graphics page, and what are the effects of the home address and area address and all these things
i am not able to relate them

can u describe it briefly
 

glcd t6963

Hi,

Seems like you enjoy doing the hard glcds, that controller is a very old type and rather hard to use, I went for the more modern types and got good results.

There was a magazine article on the T6963c controller by the late John Becker for EveryDay Practical Electronics but since they started with their new site I cannot find the full downloads.

However I still have the code which shows the all the routines including the setup.
The code is heavy going but hope you can make use of it.
 

t6963c glcd

anybody have some help in C
basically i don't want the code , i want the steps need for each section of program
 

glcd t6963c

Tajinder Singh said:
anybody have some help in C
basically i don't want the code , i want the steps need for each section of program

_http://www.sparkfun.com/datasheets/LCD/Monochrome/T6963C-AppNote.pdf
_http://www.sparkfun.com/datasheets/LCD/Monochrome/AN-029-Toshiba_T6963C.pdf

maybe the above would help.
 

how to start t6963 glcd

Hey everybody its good news.
I have developed my code for inerfacing with this graphics lcd.

Thankyou all
 

hey please mail me your codes to interface GLCD with t6963 controller along with some application notes if u have them...thanks in advance...my email id is tusharjagz@yahoo.com
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…