Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for RFID TAG reader that works at 3.3 volts

Status
Not open for further replies.
A

alba800

Junior Member level 2
Junior Member level 2
Joined
Oct 6, 2003
Messages
20
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
184
RFID TAG reader

Hi,
so far I have been using the HTRC1100 tag reader chip from Philips for 125KHz transponders.
Now I have to design a new board but the power supply has to be 3.3Volts.
Do You know of any similar IC that works at 3.3 volts?

thanks in advance.

Alba800
 

Re: RFID TAG reader

MFRC500 is a RFID tag reader buth at 13.56 MHZ
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top