Looking for replacement for SK8085 IC

Status
Not open for further replies.
D

deejay2k1

Newbie level 5
Joined
Apr 26, 2004
Messages
8
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
71
has anyone used this ic? originally it was made by Unitrode, but they merged with TI, and nobody knows a replacement for it. It seems to be more likely a 3842, but with internal Rt/Ct ....
 

sk-8085

i've done some research, burned a few, but i finally manage to replace sk8085 with uuc3842.

here it goes:

swap pin 1 and 2 (comp and feedback)

mount 100k resistor between 1 and 2

remove capacitor between gnd and pin 4

mount RC network between 4 (ref out), 8 (RC), and gnd (eg. 10k from pin 8 to pin 4, 4.7 nF between pin 4 and GND)

Good luck .... please notify in case of problems

dragos_mb@yahoo.com
 
Re: sk 8085

hello;
thank you very much for sharing your experience.
i replaced sk-8085 as per your instruction and it worked, but now i am facing a problem, when i turn on the power, output starts blinking and sound like click.. click.. and when i puts some load at this condition , then output stops clicking and holds and produces constant output but generated whistling sounds.
please suggest what should i do now?

i am attaching the behavour of power supply
YouTube - 01032011005

thank you for your cooperation
Best Regards
mkk
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…