Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

looking for a programmable PLL chip for clock generation

Status
Not open for further replies.

chenkl

Newbie level 6
Newbie level 6
Joined
Aug 8, 2009
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,376
looking for a PLL chip

Hey,

I'm looking for a programmable PLL chip for clock generation. I need two clocks running at "fc" and "fc+50kHz", in which "fc" need to be programmable in the range of 1~10MHz.

I found LMK04000 from National Semiconductor, which gives great clock performance but the minimum programmable step is about 500kHz. Thus I need external dividers to make the resolution down to 50kHz.

I'm wondering whether you guys know any other better solutions? Thanks!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top