[SOLVED] LNA design help,(my stimulation vs real results )

Status
Not open for further replies.
H

hellotoke

Junior Member level 2
Joined
Sep 26, 2023
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
112
So i built and tested my LNA,these are the results below the gain value at 566MHZ is where i want it to be but the gain at 800MHZ isnt right its way to low compared to the stimulation on the left in awr.Heres my pcb layout on fr4 1.6mm thickness.any help or advice

 

Sort by date Sort by votes
Hello,

At 800MHz you have a really poor matching (-0.35dB), practically a full reflection. Maybe your problem is in the input matching network. When the signal not enters the amplifier you couldn't have gain. Could you send a schematic of the circuit?

By the waye, where is the LNA located excatly?

Regards
 
Upvote 0 Downvote
This layout is NOT a RF layout. Even-tough the operating frequency is low, the layout is bad.
 

Upvote 0 Downvote

i matched it at 566 MHZ
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…