robismyname
Full Member level 6
- Joined
- Jan 17, 2008
- Messages
- 390
- Helped
- 11
- Reputation
- 22
- Reaction score
- 9
- Trophy points
- 1,298
- Location
- Central Florida
- Activity points
- 4,603
Im trying to simulate the lm693 comparator in electronic work bench.
With a Vref=Vcc = 5V
R1 = 100K
R2 = 2K
R3 = 8 K
When Vin reaches 4.92125 V this will trigger a low output
When Vin reaches 2.95276 V this will trigger a high output
I was expecting a change in output when I changed the sine wave amplitude on the function generator. However no matter what amplitude changes I make to the function gnerator my output is the same.
WHy isn't my simulation working?
With a Vref=Vcc = 5V
R1 = 100K
R2 = 2K
R3 = 8 K
When Vin reaches 4.92125 V this will trigger a low output
When Vin reaches 2.95276 V this will trigger a high output
I was expecting a change in output when I changed the sine wave amplitude on the function generator. However no matter what amplitude changes I make to the function gnerator my output is the same.
WHy isn't my simulation working?