cupoftea
Advanced Member level 6
- Joined
- Jun 13, 2021
- Messages
- 3,064
- Helped
- 62
- Reputation
- 124
- Reaction score
- 139
- Trophy points
- 63
- Activity points
- 16,001
Hi,
The attached shows the Vout vs Freq graph for a 2kW LLC. (Half Bridge)
Vin is 390VDC.
It shows that between 50khz and 100khz, you can charge a wide range of battery voltages.
As such, i believe LLC is the best charging method for high voltage batterys, would you agree?
The LLC, with Full Wave bridge rectifier, and synch rects, suffers no overvoltage spikes on the output rectifiers (and sych rect fets) at all, thus its superior excellence for high voltage outputs.
With PSFB, you have to up-rate the sec-side sync rect fets in voltage due to the voltage spikes they are going to see....not so with LLC and FWB output (with sync rects, of course)
The attached shows the Vout vs Freq graph for a 2kW LLC. (Half Bridge)
Vin is 390VDC.
It shows that between 50khz and 100khz, you can charge a wide range of battery voltages.
As such, i believe LLC is the best charging method for high voltage batterys, would you agree?
The LLC, with Full Wave bridge rectifier, and synch rects, suffers no overvoltage spikes on the output rectifiers (and sych rect fets) at all, thus its superior excellence for high voltage outputs.
With PSFB, you have to up-rate the sec-side sync rect fets in voltage due to the voltage spikes they are going to see....not so with LLC and FWB output (with sync rects, of course)