Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LG tv ultra slim XD 21FU6RG-T4

ZaneM

Newbie
Newbie level 1
Joined
Jan 12, 2024
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Good day Peeps

My LG tv Ultra Slim XD model 21FU6RG-T4 doesn't turn On when i try to turn it On it promise but 2to3 seconds as waiting for pictures then Standby indicator blinking any Help what might be the problem
 
this TV is built on Chassis CW81B and the schematic diagram will be attached on this post , your TV in protection mode and you have to check the power supply rails first and get sure that the power supply is working correctly specially the +B supply = 115V that go to the collector of HOT through the primary of the FBT , you can disconnect the HOT terminals to check if the protection caused by Power supply or Horizontal output stage , also check Vertical output , it sometimes cause the same problem !
--- Updated ---

LG_21FU6RG_Ch_CW81B Schematic
 

Attachments

  • LG_21FU6RG_Ch_CW81B.pdf
    2.7 MB · Views: 163
Last edited:

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top