Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

levelshifter for sd card using SN74LVC2T45DCTT

Status
Not open for further replies.
G

gmarocco

Junior Member level 1
Junior Member level 1
Joined
Nov 7, 2011
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,408
I have built a levelshifter for micro-sd card using SN74LVC2T45DCTT. It works on the short term but I would like a point of view on the long term because after some hours of activity one of the two levelshifter exploded.
The signals MOSI, MISO,CLK and CS are connected to an ATMEGA644 working at 5V. I attach the schematic
Thanks in advance
 

Attachments

  • levelshifter for sd card.pdf
    43.4 KB · Views: 147

please see the attached schematic for mosfet based bi directional level shifter. mosfet_level_converter.jpg
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top