Level shifter in design

Status
Not open for further replies.
W

wipshami

Member level 1
Joined
Jan 19, 2013
Messages
34
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,702
Hi All,

My IO has an output voltage 2.3v-3.3v and the design needs constant input 1.8v. Anybody can suggest the levelshifter methodology that can be used?

Any inbuilt levelshifter available ? or we have to design them in virtuoso ?

Thanks
 

I think you need a voltage divider ckt by using resistors,
I had faced similar scenario while using lattice LCD Pro Evaluation Kit with ECP2 FPGA and I added a resistor for voltage divider
 
Since you want regulation to 1.8V...

A plain red led might do the job.

These simulations show how you could (a) dial up to 1.8V in case the led has too low a threshold, or (b) use a resistive divider across the led in case it is too high.

 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…