Jul 18, 2024 #1 C cupoftea Advanced Member level 5 Joined Jun 13, 2021 Messages 2,930 Helped 59 Reputation 118 Reaction score 134 Trophy points 63 Activity points 15,518 Hi, The termination pin on page 4 is said to be "2.4min". But do you know the max? We need to know as we have little space on the PCB. PQ26/20 former on page 4 (CPV-PQ26/20-1S-12PD-Z) https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwilp_Gew7CHAxVmX0EAHXFpBqkQFnoECBUQAQ&url=https%3A%2F%2Fferroxcube.home.pl%2Fprod%2Fassets%2Fpq2620.pdf&usg=AOvVaw2Cr1xKXycapxUcHoCEOw6O&opi=89978449 If its more than 2.4mm, then we'll have to turn the former by 90 degrees and have the isolation barrier "Line" going 90 degs to the "Pin lines" (we are doing offline 2 tran fwd)
Hi, The termination pin on page 4 is said to be "2.4min". But do you know the max? We need to know as we have little space on the PCB. PQ26/20 former on page 4 (CPV-PQ26/20-1S-12PD-Z) https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwilp_Gew7CHAxVmX0EAHXFpBqkQFnoECBUQAQ&url=https%3A%2F%2Fferroxcube.home.pl%2Fprod%2Fassets%2Fpq2620.pdf&usg=AOvVaw2Cr1xKXycapxUcHoCEOw6O&opi=89978449 If its more than 2.4mm, then we'll have to turn the former by 90 degrees and have the isolation barrier "Line" going 90 degs to the "Pin lines" (we are doing offline 2 tran fwd)
Jul 20, 2024 #2 FvM Super Moderator Staff member Joined Jan 22, 2008 Messages 52,853 Helped 14,777 Reputation 29,839 Reaction score 14,214 Trophy points 1,393 Location Bochum, Germany Activity points 299,995 Consider TDK PQ26/20 coil former variant. It comes with blind pins not extending to winding room. Upvote 0 Downvote
Jul 20, 2024 #3 C cupoftea Advanced Member level 5 Joined Jun 13, 2021 Messages 2,930 Helped 59 Reputation 118 Reaction score 134 Trophy points 63 Activity points 15,518 Thanks, though i do need those pins that extend laterally, in order that i can terminate the coils, because i have trouble terminating the multi strand coils to a normal pin. Its fiddley for me. Upvote 0 Downvote
Thanks, though i do need those pins that extend laterally, in order that i can terminate the coils, because i have trouble terminating the multi strand coils to a normal pin. Its fiddley for me.