Length of termination pin on PQ26/20 former?

[cupoftea]

Hi,
The termination pin on page 4 is said to be "2.4min".
But do you know the max? We need to know as we have little space on the PCB.

PQ26/20 former on page 4 (CPV-PQ26/20-1S-12PD-Z)

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwilp_Gew7CHAxVmX0EAHXFpBqkQFnoECBUQAQ&url=https%3A%2F%2Fferroxcube.home.pl%2Fprod%2Fassets%2Fpq2620.pdf&usg=AOvVaw2Cr1xKXycapxUcHoCEOw6O&opi=89978449

If its more than 2.4mm, then we'll have to turn the former by 90 degrees and have the isolation barrier "Line" going 90 degs
to the "Pin lines"

(we are doing offline 2 tran fwd)

 

[FvM]

Consider TDK PQ26/20 coil former variant. It comes with blind pins not extending to winding room.

 

[cupoftea]

Thanks, though i do need those pins that extend laterally, in order that i can terminate the coils, because i have trouble terminating the multi strand coils to a normal pin. Its fiddley for me.