LDO dual mode - high power and low power

Status
Not open for further replies.
V

vovan76

Junior Member level 3
Joined
Aug 19, 2009
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,484
Hi
I need to design LDO which will work also for retention mode where SPEC for self current is very low.
For regular mode Iself <800u
For low power mode Iself<10u

Somebody have an expirience for such kind of design?

Lets say i can design high power amplifier and switch it for low power mode - but during the switching LDO output volatge can jump up /fall down and go out from SPEC limits

BTW i have an option to design such LDO with NMOS pathgate (OTA has option for higher VDD )

Thanks
 

Don't you think you can bowl down both modes with Iself<10µ ? An LDO's output power will be determined by the W/L size of the output device; the remainder of the circuit shouldn't change its power (current) consumption distinguishably dependent on power (current) output (provided that it's a full MOS circuit).

Regulation speed just depends on the control amplifier, its feedBack speed, and how fast the amplifier's output current can load the output device's input capacitance. Perhaps a few µA are enough for that?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…