RAJPUT VIDISHA
Member level 1
![Member level 1](/styles/images/ranks/dlevel1.gif)
hello, i'm new to pic microcontrollers and i want to dispaly something on my LCD but this code is not working . plzz anybody can help
Code:
// LCD module connections
sbit LCD_RS at RB4_bit;
sbit LCD_EN at RB5_bit;
sbit LCD_D4 at RB0_bit;
sbit LCD_D5 at RB1_bit;
sbit LCD_D6 at RB2_bit;
sbit LCD_D7 at RB3_bit;
sbit LCD_RS_Direction at TRISB4_bit;
sbit LCD_EN_Direction at TRISB5_bit;
sbit LCD_D4_Direction at TRISB0_bit;
sbit LCD_D5_Direction at TRISB1_bit;
sbit LCD_D6_Direction at TRISB2_bit;
sbit LCD_D7_Direction at TRISB3_bit;
// End LCD module connections
void main()
{
ADCON1 = 0x00;
CMCON = 0X07; // Disable comparators
TRISB = 0X00; // PORTB as output
PORTB = 0XFF;
Lcd_Init(); // Initialize LCD
Lcd_Cmd(_LCD_CLEAR); // Clear display
Lcd_Cmd(_LCD_CURSOR_OFF); // Cursor off
Lcd_out(1,1,"APEX"); // Write text in first row
Delay_ms(1000);
Lcd_out(1,1,"techs");
}
Last edited by a moderator: