Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Layer 3 switch problem

Status
Not open for further replies.
R

rathiguru

Newbie level 1
Newbie level 1
Joined
Sep 25, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
How to block multicast network ip in layer 3 switch?

For example, One switch having two multicast networks 234.0.0.0/28, 235.0.0.0/28. second switch(layer 3 switch) is connected to firsh switch(link is trunk connection), then multilayer switch will allow only network(234.0.0.0/28) through first four ports.

Any one tell me, how to make this scenario?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top