Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

L298 operating at high voltage

Status
Not open for further replies.
G

gameelgamal

Member level 5
Member level 5
Joined
Dec 14, 2006
Messages
85
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Egypt
Activity points
1,888
I am using an L298 as a H-bridge Inverter. Is there a configuration so that I can increase the output voltage of a l298 instead of the maximum 46V to about 100V or more?
 

gameelgamal said:
I am using an L298 as a H-bridge Inverter. Is there a configuration so that I can increase the output voltage of a l298 instead of the maximum 46V to about 100V or more?
Click to expand...
I doubt it. You should to take external BJT or MOSFET with some driver.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top