Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Know the Difference between the IPC-A-610 and IPC-J STD-001 Programs - Article

Status
Not open for further replies.
K

katyradcliff

Newbie level 6
Newbie level 6
Joined
Dec 11, 2017
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Rolling Meadows
Activity points
174
Are you curious to know the difference between IPC A-610 and IPC J-STD-001 training programs? This is the most popular question being asked mostly by the peoples who are unfamiliar with electronics industry governing specifications. Basically, The IPC J-STD-001 is the soldering specification describing procedures for producing quality soldered connections and reliable electronic assemblies while the companion IPC A-610 standard is used for PCB manufacturing and assembly for commercial electronics that provides a visual reference of PCB characteristics, along with all defects and process indicators while inspecting a board. Know the complete differences b/w both by visiting this article.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top