Just wondering if this circuit should work?

[Resistanceisfutile]

Hi, (hope I'm not breaking any rules by asking about this) I found this circuit below:

Here are the parts:
C1-Tuning Capacitor
C2-0.1uf Disc Capacitor
R1-10 Meg 1/4 W Resistor
D1-1N34 Germanium Diode
U1-741 Op Amp
L1-"Loopstick" Antenna

I was just wondering, should this circuit work as a crystal radio?

 

[FvM]

It should not work. D1 is missing a load resistor, U1 must have a mid supply bias at non-inverting input.

 

[Resistanceisfutile]

Ok, how would I find out what load I should be applying to D1?
And for the mid supply bias at the non-inverting input, would I need a resistor that halves the voltage?

 

[FvM]

1. May be 10k
2. Two resistors (a voltage divider)

 

[Audioguru]

I corrected the horrible circuit on Aaron Cake's website: