Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

It's safe to (re)programming 24CXX with SOIC TEST CLIPS ?

Status
Not open for further replies.
L

luk

Junior Member level 1
Junior Member level 1
Joined
May 26, 2003
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
140
It's safe to programming 24CXX (93CX6) with SOIC TEST CLIPS ( 8 PIN ) without to desolder the SMD Eeprom from the board ?

I can do it this with PonyProg without to desolder it from the board, just to put directly the TEST CLIPS , and to rewrite it the Eeprom ?

I need a professional answer for this question.

If anyone can tell me this please do it as quick as he can

thank you very much
 

Re: It's safe to (re)programming 24CXX with SOIC TEST CLIPS

In my case it has worked! It was a Phillips GSM Mobile phone ... :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top