ISE run out of Memory

Status
Not open for further replies.
S

SharpWeapon

Member level 5
Joined
Mar 18, 2014
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
705
Hi,

ISE 14.7, Win 7, 4GB(3.5 usable)
I have the following message when I try to simulate a project from command line. Surely, the project needs quite a lot of memory but I am worried that increasing the memory might make my system unstable. I wanted to hear if anyone has done it before and any recommendation.
Thanks!
 

For Win 7 buy more memory it can handle a lot more than just 4GB. I don't believe you can use /3G switch that was for 32-bit XP machines.

Here are the memory recommendations for various parts.
https://www.xilinx.com/ise/products/memory.htm


Regards

- - - Updated - - -

Just realized maybe you have the 32-bit version of Win 7. If so then if the PC hardware supports a 64-bit OS then install one. If you don't want to buy WIn7 64-bit, then buy memory, add another partition on your HD and install a 64-bit version of linux and get ISE for that OS.
 
All the solutions are costly. Thank you for the reply, I will see which one I will choose.
 

Plugging in 8 or 16 Gb doesn't seem all that costly... Certainly cheaper than waiting for ages while windows does the memory management dance, or running out of memory entirely. That said, I recently checked DDR2 SODIMM prices and those were a bit silly. So I should be more precise and say "Plugging in 8 or 16 Gb of mainstream DDR3 doesn't seem all that costly".
 

Well I think cost wise your best approach will be to upgrade the memory https://www.crucial.com/ and install 64-bit linux. You can install the Linux version of ISE without having to have a new license as the machine's NIC doesn't change (in case you thought you needed to purchase a new copy).
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…