Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

? ISA to LPT interface using FPGA ?

Status
Not open for further replies.

elcielo

Full Member level 6
Full Member level 6
Joined
Jun 13, 2002
Messages
383
Helped
15
Reputation
30
Reaction score
8
Trophy points
1,298
Activity points
3,250
like ppc34c60 ?

verilog or vhdl or schematic
 

What about using a simple 82c55 to attach the ISA hardware?
But LPT is slooow, it will be no fun.
 

The LPT port is just a simple bidirectional port. Designing an ISA LPT port in FPGA should be fairly simple. I would recommend verilog or vhdl to do your design.
 

i think taht is more simple to take a ic for parallel port and use a fpga or better i think a cpld to make the bridge whit the isa bus.
G.
 

Hi it is complet proyect with source and schematics Data Acquisition System for the 16 bit ISA Bus using a ispLSI-1016 to control the bus an other things, it have a driver for for windows with source code.
It has the GNU tool to program the ispLSI-1016.
And have a little how to about the all design.
It have a Osciloscope software to use with it card and has the source.
And the best is it has GNU license.

I hope it help you elcielo
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top