Is there similar model in Silvaco TCAD Atlas vs Sentarus Non local band to band tunnelling model

Current I’m trying to perform modeling on GaN HEMT ohmic contact by using software of Silvaco. The structure is simple whereby to have an interfacial layer of heavily doped N++ layer between contact and semiconductor which for both anode and cathode. N++ heavily doped layer will be under the metal contact (anode and cathode) and the material is GaN and semiconductor bulk also GaN however with lighter doping (1E+17/n-type & this if fix). GaN N++ layer range from 1E+20~5E+17 uniform n-type. I understand there is same simulation with using Sentaurus software and using non-local band to band tunnelling model and I was trying to use same model in Silvaco. However the result turn out to be the current is one order magnitude lower 10E-7 for mine in Silvaco vs the 10E-6 compare to Sentaurus one. And I just would like to get some advice here is there any similar model in Silvaco vs Sentaurus non-local band to band model?