Is there a easy way to place stitch vias in CADSTAR?

Status
Not open for further replies.
S

swen_s

Member level 1
Joined
Nov 29, 2012
Messages
40
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,598
Is there an easy way to place stitch vias in CADSTAR?

I want to connect (stitch) two copper areas located on two different planes, both are GND.
 

I fail when I do this. The copy does not work. Could you specify step by step how you do it?
 

This needs to be done in PREditorXR as that is the only place you have this functionality.

If you have the ability to copy/paste tracks then you can select a via and copy/paste it.
You need to unpour any positive pours underneath so you can paste vias connecting ground pours only.

If you cannot copy/paste then start routing, double click to put a via in then escape to stop the route.

Do this at every point you want a via.

Consider making a via grid to get them nice & lined up.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…