Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Is the Transfer Matrix Method formulas based on special units?

Status
Not open for further replies.
E

elham.n

Newbie level 3
Newbie level 3
Joined
May 11, 2010
Messages
3
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,283
Activity points
1,312
Hi,
I want to use transfer matrix method for the one-dimensional periodic structure,in a matlab code.
I use this formula:

M=[cos(kz) (i/q)*sin(kz); i*q*sin(kz) cos(kz)]

k=k(z)=(w/c)*sqrt(eps)*sqrt(mu)*sqrt(1-(sin(teta))^2/eps*mu)
q=(sqrt(eps)/sqrt(mu))*sqrt(1-(sin(teta))^2/eps*mu) , (for TE mode)
z=thickness of each layer

to get the electric and magnetic fields at the end of structure,
i have a problem about transmission diagram,im so confused!
is this formula based on MKS,CGS or other special units or not?

tnx.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top