I am designing an LDO.
In simulation, I'm using an idc source instead of a resistor to see if I can supply the desired current value,
but does a device exist that can force current like an idc source in the real world?
There are circuit configurations and IC's that can generate a constant current from a voltage source (current-mirrors are often used in analog ICs for that purpose) but none that can generate constant-current by themselves the way a battery generates a (mostly) constant-voltage.
There are circuit configurations and IC's that can generate a constant current from a voltage source (current-mirrors are often used in analog ICs for that purpose) but none that can generate constant-current by themselves the way a battery generates a (mostly) constant-voltage.
An inductor at the moment of shut-off attempts to continue carrying the same amount of Amperes as it did just beforehand. For a brief time it generates sufficient voltage to do this. The voltage can soar up to thousands, even to the point where sparks jump across conductors (arcing). To create a longer time (inductive time constant) while current fades, use a large Henry value and low ohms.