Irf 2130 - problem with the circuit.No output

Status
Not open for further replies.
J

josephkiran

Newbie level 1
Joined
Aug 18, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
16
Hey!!
Iam using IRF2130 to make a simple inverter with IRF460 mosfet.I referred application note of that.
As a simple check of the driver! I clamped Vcc to 15V with respect to Vss without any capacitor.
Iam giving input single Pulse of peak 3 V and 50% duty into LIN3 with Vso as ground. If i check LO3 with respect to Vso i dont find any output.
Is this the right way of doing it??
I feel the circuit is incomplete just like this? Can u please help me with this???
 



Thanks for responding.I have gone through Application note AN-985 and In the circuit shown in it, i understand a capacitor of 250uF is connected between Vcc and Vss is just to regulate Vcc to 15 V.So i dint connect any capacitor at input side..And coming to low inputs and outputs, there are no boot strap capacitors required,So i thought i can check with them first.Iam uploading the circuit diagram that i made.
Please suggest me where iam missing.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…