IR2117 for the Buck Converter

Status
Not open for further replies.
R

ravi_xmas

Newbie level 2
Joined
Aug 16, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,294
Hello,

Can anybody tell me, how to calculate the Bootstarp components for the following spec. of DC-DC Buck converter.

Power stage:
Input Voltage: 80-130 DC
Output Voltage :30V DC
Output Current: 20A
Switching Frequency: 200Khz

Control stageIR2117 with SG3524)

I am not getting proper PWM pulse after the certain Input voltage, is it bootstarp issue?
Regards,
Ravi
 

Hello hanif,

Thanks for your replay. But I have designed the Bootstrap capacitor as per the application notes only, but still having problem.

Kindly let me know, is there is any high side driver for the Buck converter or shall we use IR2110 (high alone ) for this application?

Thanks,

Ravi
 

There's no functional difference between 2117 and 2110 HS driver, both should work. You have to limit the duty cycle
below 100%, this shouldn't be a problem with 3524.

P.S.: With no output load, bootstrap operation most likely isn't maintained.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…