IP addresses on a Tornado embedded system

[tapa]

Hi all, I would like to make you a question:

I have two Ethernet devices in the same equipment (denominated A and B) connected to other Ethernet devices (C and D) in another equipments (could be one or two) through two different physical interfaces. That is,

A ----- >C
B ------>D

Can A and B devices share the same IP address?. And C and D?
Would be the communication possible between this two pairs of Ethernet devices?

The software I'm using is Tornado 2.02. Can you give me any application note or reference?


Thanks all


TaPa

 

[cfant]

A, B, C and D must have dirrent IP addresses.

 

[Prabakaran]

Sharin File or sending the file through Ethernet must differnt IP address . Cos the same IP conflict the IP address of the system and there is a dat collision in that. So better Try with Differnt IP address and check it.

 

[tapa]

I found the solution ... i do not need the 2 ethernet working ad the same time... The "active backup" as a redundant is my solution.

Thank all

TaPa