Prince Vegeta
Member level 5
- Joined
- May 29, 2012
- Messages
- 84
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 2,011
hi guys...
I design an ATS project, and I tried to use 2 MOC+Triac to switch each source, but it gave me problems... lots of triacs burnt and the 2 sources seem to be not completely interlocked.
some people advised me to use Relays. the 2 sources will be 220v AC (means and from an inverter), PIC MCU will do the control part.
I need a design/schematic idea to how to do the interlocking between 2 sources that controls 1 load (Lamp or so).
I use Proteus for simulation and I failed to have any successful circuit so far.
thanks
I design an ATS project, and I tried to use 2 MOC+Triac to switch each source, but it gave me problems... lots of triacs burnt and the 2 sources seem to be not completely interlocked.
some people advised me to use Relays. the 2 sources will be 220v AC (means and from an inverter), PIC MCU will do the control part.
I need a design/schematic idea to how to do the interlocking between 2 sources that controls 1 load (Lamp or so).
I use Proteus for simulation and I failed to have any successful circuit so far.
thanks